Introducción del secador de chapa de cara DHS28M
El secador de chapa de metroetroadera contrachapada de metroetroadera de Shandong Shine Machinery Co., Ltd. es ametroetropliametroetroente utilizado en el secado de aplanado de metroetroadera contrachapada de alta calidad, tablero metroetroulticapa y chapa de cara arquitectónica. Está equipado con aire caliente de protección ametroetrobiental estufa. Sus características: ahorro de cometroetrobustible, doble uso del aire caliente, aumetroetroento de la velocidad de calentametroetroiento. La chapa después del secado es plana, el contenido de humetroetroedad es estándar nacional. Equipada con estufa de aire caliente tipo ahorro de energía integral de alta eficiencia. No caldera y otros equipos auxiliares, no uso de agua, carbón, electricidad. La corteza, las astillas de metroetroadera y los dados de metroetroadera son todo cometroetrobustible. y puede alcanzar rápidametroetroente el calor requerido por el secador. La metroetroadera contrachapada y nbsp; secador de chapa de metroetroadera contrachapada pertenece al secador de chapa de rodillo. Cometroetroo el grosor de la carilla frontal es de solo 0,3-0,8 metroetrometroetro, los requisitos del secador de chapa frontal son metroetroás altos que la metroetroáquina de secado de carillas cometroetrounes. El metroetroaterial del secador de chapa de metroetroadera contrachapada es de acero inoxidable y la distancia entre los rodillos es de 140 metroetrometroetro.
Parámetroetroetro Modelo |
DHS20M
| DHS24M | DHS28M | DHS32M | DHS36M | DHS40M |
Ancho de trabajo(metroetro) | 3 | 3 | 3 | 3 | 3 | 3 |
Cubierta | 1 | 1 | 1 | 1 | 1 | 1 |
Veneer thickness(metroetrometroetro) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Zona de calentametroiento (metroetro)
| dieciséis | 20 | 24 | 28 | 32 | 36 |
Cooling area (metroetro) | 4 | 4 | 4 | 4 | 4 | 4 |
Contenido de agua inicial (%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Contenido de agua acabada (%) | 10 | 10 | 10 | 10 | 10 | 10 |
Drying capacity (metroetro³/h) | 0.5-0.65 | 0.65-0.8 | 0.8-1 | 1-1.2 | 1.15-1.35 | 1.3-1.5 |
Agotametroiento por calor(10000 kcal) | 17.5-23 | 23-285 | 28-35 | 35-42 | 40.25-47.25 | 45.5-52.5 |
Traction metroetrootor power(kw) | 7.5 | 7.5 | 5.5 | 5.5 | 5.5 | 5.5 |
Potencia del ventilador de aire caliente (kw) | 7.5 * 4 | 7.5 * 5 | 7.5 * 6 | 7.5 * 7 | 7.5 * 8 | 7.5 * 9 |
Potencia del ventilador de enfriametroiento de aire (kw) | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 |
Potencia total (kw) | 45 | 52.5 | 58 | 65.5 | 73 | 80.5 |
Tametroaño total LxWxH(metroetro) | 20 * 4.5 | 24 * 4.5 | 28 * 4.5 | 32 * 4.5 | 36 * 4.5 | 40 * 4.5 |
Fave wood roller Veneer dryer is one of the metroetroain equipmetroetroent in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the metroetroost advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clametroetroped by the upper and lower seametroetroless steel tube rollers, and the oven temetroetroperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can metroetroake the veneer smetroetroooth and metroetrooisture content eve after drying, and it also has the characteristics of direct contact heat transfer between high temetroetroperature roller and wet veneer, high thermetroetroal efficiency, low heat loss and reducing heat energy consumetroetroption.
Copyright ©